Malwa 560C Combi Harvester/Forwarder


Malwa's class leading chassis configured to give a harvester and a forwarder in one machine.  With the ability to change between a harvester with a cutting diameter of 42 cm and a forwarder with a 5.5 tonne carrying capacity in about 20 minutes this truly is a one stop shop for sylvicultural thinning.  The low environmental impact and rugged design are the same as the other machines in the 560 series.

Productive in - stand low impact dual machine which simply and easily converts between harvester and forwarder without compromising productivity or performance of either. A unique solution with removable counterweights allows the Combi to perform as well as a traditional harvester.

Spacious storage compartment houses four 20 - litre containers for extra diesel, for example, or stump treatment fluid. Plus extra chains, bar and special tools.

May be transported by means of hook - lift platform. Being able to move ’two machines at one go’ makes the Combi perfect both for thinning tasks and dealing with windblown sites.

2.8 litre CAT - engine that meets the demands according to Euro 5/Stage - V. Logmax 2000T harvester head with up to 42 cm cutting diameter and 5.5 tonne load capacity as a forwarder.

Uniquely good handling and mobility – even on sensitive ground or moorland.

Link to manufacturer:

Load Bunk Area2 ㎡
Steering Angle± 45°
Number of Bunks as Standard3
Standard Tyre Size500/50 - 17, 500/60 - 22.5
Standard CraneCranab FC45
Reach6.1 m
Lifting Torque45.6 kNm
Lift Capacity at 3m1120 kg
Slew Torque13 kNm
Standard GrappleGrippen HSP 015
Max Felling Diameter42 cm
Engine Power75 hp (55 kW) @ 2,200 rpm
Oil Pressure195 bar
Oil Flow148 L/min @ 1,700 rpm
Transport Dimensions2850 x 1950 x 6300 mm (HxWxL) Ground clearance 400 mm
Country of ManufactureSweden